Idiomas disponibles
Idiomas disponibles
Any non-observance of this instruction bears the risk of an electrical shock which
may cause damage to persons or property.
Please inspect the device for damage occurred during transportation. In case of damage, the retailer
has to be informed immediately, at the latest within 8 days after the date of purchase.
2. Range of use
Submersible clean water pumps from T.I.P. are highly efficient electrical pumps for discharging clear,
clean or moderately dirty water containing solids up to the maximum size specified in the technical
details. These high-quality products with their convincing performance data were developed for the
multiple purposes involved with draining and pumping liquids from one place to another.
The typical ranges of application of submersible clean water pumps include: draining of ponds, basins
and storage containers as well as discharging of rain water or seepage.
Submersible clean water pumps from T.I.P. are suitable for stationary or temporary installations.
This product is intended for private use in the home area and not for commercial or industrial purposes
or for continuous circulating.
The pump is not suitable for use in table-top fountains, aquariums or similar ranges of use.
When using the unit in a pond, please take the required action to ensure that no inhabitants of the
pond will be sucked in.
The pump is not suited to discharge saltwater, faces, inflammable, etching, explosive
or other hazardous liquids. Please observe the max. temperature of the liquids to be
discharged stated in the technical data.
Inside the pump, lubricants are used which may contaminate the liquids being
discharged in case of any improper operation or damage of the device. The
lubricants used are biologically degradable and non-hazardous to health.
3. Technical Data
Model
Mains voltage / frequency
Nominal performance
Protection type
Pressure port
1)
Max. flow rate (Q
)
max
Max. pressure
1)
Max. delivery height (H
)
max
Max. submersion depth
Max. size of the solids being pumped
Max. fluid temperature (T
)
max
Max. cut-in frequency in one hour
Length of connection cable
Cable type
Weight (net)
2)
Min. self-priming level (A)
2)
Min. suction level (B)
2)
Cut-in level (C)
2)
Cut-out level (D)
Dimensions (L x D x H)
Item no.
1)
The values were determined with free, unreduced outlet.
2)
The values between brackets refer to the illustrations given at the end of these operating instructions.
TKX 7000
TKX 8000
230 V ~ 50 Hz
230 V ~ 50 Hz
300 Watt
300 Watt
IP X8
IP X8
41.91 mm
, male
41.91 mm
(1 ¼ ")
7,000 l/h
7,800 l/h
0.6 bar
0.6 bar
6 m
6 m
7 m
7 m
6 mm
6 mm
35 °C
35 °C
30, evenly distributed
30, evenly distributed
10 m
10 m
H05RN-F
H05RN-F
3.6 kg
3.6 kg
100 mm
100 mm
6 mm
6 mm
350 mm
350 mm
80 mm
80 mm
17 x 17 x 31 cm
17 x 17 x 31 cm
30267
30251
2
TKX 12000
230 V ~ 50 Hz
400 Watt
IP X8
, male
41.91 mm
(1 ¼ ")
(1 ¼ ")
12,000 l/h
0.7 bar
7 m
7 m
6 mm
35 °C
30, evenly distributed
10 m
H05RN-F
4.0 kg
100 mm
6 mm
350 mm
80 mm
17 x 17 x 31 cm
30252
, male
9
