114 Erasing The Imaging Plate; 115 Switching The Unit Off - Air Techniques ScanX Swift View Instrucciones De Montaje Y Uso

Usage
Remove the PSP and prepare it for recording
i
another X-ray image
EN
US
Transmitting image data to the computer
X-ray images generated via the touch screen on
the unit are saved to the SD card These X-ray
images can be imported into an imaging soft-
ware via a network connection (eg DBSWIN)
Connect the unit to the network
i
Start the imaging software
i
Start the image import via the imaging soft-
i
ware (for further information, refer to the man-
ual of the imaging software)
Save the image data
i
The image data on the memory card is
erased automatically as soon as the transfer
has been successfully completed
30
OBJ_DOKU-0000002448-001-mehrere.indd 30
11.4 Erasing the imaging plate
The image data is erased automatically after
scanning
If you do not want the image data to be erased,
this function can be disabled for the current
scanning process by selecting Disable erasing
light on the touch screen of the unit
The special ERASE mode only activates the
erasure unit of the imaging plate scanner No
image data is scanned
The PSP needs to be erased using the special
mode in the following cases:
– The first time the PSP is used, or if it is stored
for more than one week
– Due to an error, the image data on the PSP
has not been erased (software error mes-
sage)
Erasing the PSP via a computer
Select the special ERASE mode in the soft-
i
ware
Scan the PSP (see "112 Scanning the image
i
data via a computer")
Erasing the PSP via the touch screen
On the touch screen, tap on Quick scan
i
Select the scanning mode ERASE
i
Scan the PSP (see "113 Scanning image
i
data via the touch screen on the unit")
11.5 Switching the unit off
Press the on/off switch
i
As soon as the unit has shut down it switch-
es off completely The touch screen is off
2142100008L41 1708V002
for 3 seconds
24.08.2017 14:41:49