Touch Screen On The Unit - Air Techniques ScanX Swift View Instrucciones De Montaje Y Uso

Usage
Scanning the PSP
In order not to mix up X-ray images, only
scan the X-ray images from the selected
patient
Place the barrier envelope with the PSP cen-
i
trally and straight onto the input unit The
EN
opened side of the barrier envelope faces
US
down, the inactive side of the PSP faces the
operator
The feeder mechanism moves forward auto-
matically and takes hold of the barrier enve-
lope with PSP
Slide the PSP out of its barrier envelope
i
downwards into the device until the PSP is
automatically drawn in
The barrier envelope is held in place by the
feeder mechanism and is not transported
into the unit
Scanning progress is displayed on the touch
screen The image data is automatically
transmitted to the imaging software
After it has been scanned, the PSP is erased
and drops into the collection tray
Save the X-ray image
i
Remove the empty barrier envelope
i
28
OBJ_DOKU-0000002448-001-mehrere.indd 28
Remove the PSP and prepare it for recording
i
another X-ray image
11.3 Scanning image data via the

touch screen on the unit

Starting the imaging plate scanner
No PC connection is needed for scanning the
image data via the touch screen The image
data is stored locally on the memory card In or-
der to transfer the image data to the imaging
software, the unit must be connected to a com-
puter
There are two options for scanning via the touch
screen:
Scan:
Before scanning the image data, the
patient data and exposure settings of
the image are acquired and then saved
with the image data
If no patient data and exposure set-
tings of the image are entered, the im-
age is saved to a folder with date and
time
Quick scan:
The image data is saved to a folder
with the date and time and no addi-
tional information
Use Help on the touch screen for further
information on operating the unit via the
touch screen
2142100008L41 1708V002
24.08.2017 14:41:49