Air Techniques ScanX Swift View Instrucciones De Montaje Y Uso página 46

Troubleshooting
Fault
Error code 1160
EN
Error code -1171
US
Error code 1172
Error code 10000
Error code 10009
Error code -10015
Error code 10017
Error code 2
Error code 78
Firmware not running
Settings (e.g. language)
reset after unit restart
Warning message during
shutdown of the unit
42
OBJ_DOKU-0000002448-001-mehrere.indd 42
Probable cause
Final radiation deflector rotation
speed not reached
Fault on laser
SOL sensor timeout
Fault on the laser, SOL sensor or
pentaprism assembly
Unit is exposed to too much light
Internal communication error
warning; unit remains ready for
operation
PSP fed in off-center
Unit shuts down
System error during startup of the
unit
Memory card full
Fault during memory cleanup
A firmware update has been car-
ried out
Internal communication fault
Faulty configuration file
Not a malfunction
Solution
Contact technician
i
Update firmware
i
Replace the radiation deflector
i
subassembly if the problem oc-
curs regularly
Return the unit for repair
i
Inform a service technician
i
Update the firmware
i
Darken the room
i
Turn the unit such that no light
i
can be directly incident in the
entry slot
Update the firmware
i
Insert the PSP centrally
i
Wait until the unit has shut down
i
completely
Switch the unit off and back on
i
again
Update the firmware
i
Transmit image data to the
i
computer
Insert an empty memory card
i
Press and hold the reset button
i
while switching on the unit
Update firmware
i
Press and hold the reset button
i
while switching on the unit
Switch the unit off and on again
i
Switch the unit off and on again
i
Update the firmware
i
Reset the configuration to the
i
factory settings and reconfigure
Update the firmware
i
2142100008L41 1708V002
24.08.2017 14:41:52