122 Barrier Envelope; 123 Phosphor Storage Plate - Air Techniques ScanX Swift View Instrucciones De Montaje Y Uso

Usage
Clean the cover, fixing mechanism and inside
i
parts with a moist, soft, lint-free cloth
EN
US
Disinfect the cover, fixing mechanism and in-
i
side parts with a disinfection wipe
Alternatively, use a spray disinfectant on a
soft, lint-free cloth Comply with the operating
instructions of the disinfectant
Remount the fixing mechanism
i
Remount the cover
i
Touch OK on the touch screen
i
The fixing mechanism moves into the start- ing position
12.2 Barrier envelope
The surface must be cleaned and disinfected if
it is contaminated or soiled
Disinfect the barrier envelope using a disinfec-
i
tion wipe before and after placement Alterna-
tively, use a spray disinfectant on a soft, lint-
free cloth Comply with the operating instruc-
tions of the disinfectant
Allow the barrier envelope to completely dry
i
before using it
32
OBJ_DOKU-0000002448-001-mehrere.indd 32
12.3 Phosphor storage plate
Use the following cleaning agent exclusively:
– PSP cleaning wipes
NOTICE
Heat or humidity damage the PSP
Do not sterilize the PSP with steam
i
Do not disinfect the PSP by immer-
i
sion
Only use approved cleaning agents
i
Soiling on both sides of the PSP should be
i
cleaned off with a soft, lint-free cloth before
each use
Remove persistent or dried soiling with the
i
PSP cleaning cloth Comply with the instruc-
tions for use of the cleaning cloth
Allow the PSP to completely dry before using
i
it
12.4 Stylus
The Stylus can be cleaned in the same way as
the unit (see "121 Imaging plate scanner")
2142100008L41 1708V002
24.08.2017 14:41:50