Operation; Switch The Device On; Making Settings In The Imaging; Software - Air Techniques ProVecta 3D Prime Instrucciones De Uso

Usage
7

Operation

7.1 Switch the device on

CAUTION
Danger of injury by moving C-shaped
arm
EN
After the unit is switched on and the pa-
US
rameters are confirmed on the touch
screen, the C-shaped angle connector
piece is positioned� Persons can be in-
jured during this�
Nobody may be present in the area of
i
the C-shaped arm while the unit is be-
ing switched on�
Use the main power switch to switch the unit
i
on�
20
OBJ_DOKU-0000003575-mehrere-005.indd 20
The main power switch lights up green after
it is switched on� The status LED lights up
blue�

7.2 Making settings in the imaging

software

The settings are described using the Vi-
sionX imaging software for an example�
For further information regarding the use
of the imaging software, refer to the rele-
vant manual�
Children are more sensitive to radiation
than adults� Keep the exposure parame-
ters as low as possible taking into con-
sideration the image quality� Refer also to
the FDA information on pediatric X-ray
imaging�
(refer to the FDA website on this topic,
see https://tinyurl�com/FDAPediatric)�
Preparing an X-ray image in VisionX
Requirements:
– VisionX is started�
– Patient is logged-in�
– No other image acquisitions are in progress
(X-ray or video)�
Click on the required image in the menu bar i
(e�g� for a CBCT image)�
You can use to call up further acquisition
types that belong to the grouping e� g� for
5x5 Maxilla Molar right (see "Image acquisition
programs")�
2210200496L41 1904V004
17.04.2019 14:28:56