Idiomas disponibles
Idiomas disponibles
2. Install a small width blade of the correct type.
To select the correct blade dimension and
Refer to
installation position on page 11 and To replace the
blade on page 19 .
3. Make sure that the blade is sharp. Sharpen the
blade if it is necessary. Refer to
blade on page 19 .
4. Cut linear ditches in the floor. Make sure that the
distance between the ditches is the same as the
width of the long blade.
5. Install a blade with a larger width of the correct type.
To select the correct blade dimension and
Refer to
installation position on page 11 and To replace the
blade on page 19 .
6. Make sure that the blade is sharp. Sharpen the
blade if it is necessary. Refer to
blade on page 19 .
7. Remove the floor between the ditches.
To remove tile floors and floors made
of wood
WARNING:
Kevlar. The blades are very sharp.
1804 - 003 - 28.08.2023
To sharpen the
To sharpen the
Use protective gloves with
Note:
Blades with a smaller width cut the floors easier
than blades with a larger width. Blades with a larger
width are not always better or faster. A blade with a
smaller width usually cleans the floor better than a blade
with a larger width.
Note:
The blades are sharp for a longer time if the
work area is clean from unwanted material.
1. Use personal protective equipment. Refer to
Personal protective equipment on page 7 .
2. Install a chisel. Refer to
page 19 .
3. Make sure that the blade is sharp. Sharpen the
blade if it is necessary. Refer to
blade on page 19 .
4. Before operation on floors made of wood, do these
steps:
a) Cut the floor with a circular saw.
b) Remove nails and other metal objects to prevent
damage to the blade.
5. Move the product in a fan shape pattern.
a) If a tile floor is too hard and the tiles do not come
off easily, use a hammer to break the tiles before
you use the product.
To replace the blade on
To sharpen the
15
