Idiomas disponibles
Idiomas disponibles
MOUNTING INSTRUCTIONS
Center of the
Dartboard (Bull's Eye)
Wall
Throwing line
237cm
TOOLS REQUIRED FOR ASSEMBLY:
• Screwdriver and drill - (not included)
• 3 AA Batteries (not included)
1. Select a suitable location with about 2.5m (8 feet) of open space. The throwing
distance between dartboard and player must be 2.37m (7 feet 9¼ inches).
2. Place two marks side-by-side of the selected wall studs 190cm (74 7/8") above
the floor, with 12,4 cm (4 7/8") between them. Screw two screws into the reference
marks until the screw heads are protruding about 13mm (1/2') from the wall.
3. Drill pilot holes where you have marked, and mount the dartboard using the
mounting screws provided.
4. Install 3 AA batteries (not included) to the battery holder. Replace the battery
cover.
5. Familiarize yourself with the function of your dartboard before use. Should you
suspect the dartboard does not work correctly, please refer to the TROUBLE
SHOOTING section in this manual first.
TIPS AND GUIDANCE
This game is designed for use with SOFT-TIP DARTS ONLY. Use of Steel-Tip
Darts will cause damage to the dartboard.
Apply proper force and stance to throw darts. It is not necessary to throw hard for
the darts to stick in the board. The recommended weight of soft-tip darts is no
more than 16 grams.
To reduce bounce-outs, you shall use the same kind of soft tips as those come
with the game. Long tips are not recommended for this game.They break or crook
more easily.
2
