Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Maintenance
Replacing a stopper
A spare stopper is included with the package contents. Once it has worn down,
replace the original stopper as follows (see Fig. D):
1. Use a hex key
2. Screw the axle screw
At the same time, use the hex key to fix the axle thread so that the axle screw
can be screwed out all the way.
3. Take the axle screw and the axle thread off of the stopper block.
4. Pull the worn stopper
5. Push the new stopper
6. Push the axle thread back into the stopper block.
7. Use a hex key to fix the axle thread.
8. Use the other hex key to screw the axle screw back in.
At the same time, use the hex key to fix the axle thread so that the axle screw
can be screwed back in all the way.
You have successfully replaced the stopper (see step 2 in Fig. D).
16
10
to fix the axle thread
14
out with the second hex key.
down and off of the stopper block (see step 1 in Fig. D).
18
8
into the stopper block.
16
of the stopper block
17
.
Capítulos
Tabla de contenido
