Secondary air system
Unscrew the two screws "A" (Fig. 43) and take out the
aluminium Secondary Air System Cover along with reed
valve. After releasing the pipe from the rubber tube fixed
on the cover. Then remove the plastic cover, extract the
filter "B" (Fig. 44) and wash it with water and soap solution
& below dry with air.
Refit the filter property in its place. Place the reed
valve in Secondary Air System Cover & fix with screws
properly. Ensure replacement of O-Ring given in the
box for proper sealing, every time you disassemble the
filter.
Remove the sponge filter "C" (Fig. 45) from intake pipe
& wash with soap and water.
Dry with air before refitting.
86
