MAINTENANCE
Removal and refitting of cowls
The levers for opening the cowls are located under the
saddle and can be operated only whit the saddle is
unlocked and lifted.
For removal of cowls lift the saddle as explained on
page 66. Pull the lever "1" for engine cowl & "2" for spare
wheel cowl so that the hook "3" is free from the cowl
anchoring.
Swing the cowl outwards so that the front locating pin "4"
is free from its housing.
Lift the cowl upwards from the front pivoting on its rear
section so that the clasp "5" releases from the chassis
bracket.
Pull the cowl outward on the pin "6" so that the latter
clears its housing, thus releasing the cowl.
For refitting the cowls follow the reverse procedure.
1.
Lever for engine cowl
2.
Lever for LH cowl
3.
Hook for locking
4.
Front locating pin
5.
Clasp securing cowl to chassis
6.
Rear hooked pivot pin
77
