Pioneer DFM-909 Manual De Instrucciones página 41

No. Name
26 FLANGER2
27 PHASER1
28 PHASER2
29 TOUCH PHASER1
30 TOUCH PHASER2
31 FILTER (LPF)
32 FILTER (HPF)
33 FILTER (BPF)
34 FILTER PAN
35 COMPRESSOR
(*1) When the channel fader or cross fader is used to lowering sound volume, no effect sounds will be heard, even if monitor
SELECT switch is set to the [EFFECT] position.
(*2) When EFFECT switch is turned OFF, no effect sounds will be heard even if the monitor SELECT switch is set to the [EFFECT]
position.
Parameter 1 (TIME/SELECT dial)
Explanation
Set period of flange effect
frequency shift.
Set period of phase effect
frequency shift.
Set period of phase effect
frequency shift.
Set sensitivity corresponding to
input volume.
Set sensitivity corresponding to
input volume.
Set period of cutoff frequency
shift.
Set period of cutoff frequency
shift.
Set period of center frequency
shift.
Set period of cutoff frequency
shift.
Set time until completely
compressed. The time required
to return to the original state is
simultaneously set at the same
value.
Setting range (unit)
10 – 32000 (msec) Rotate to right for stronger effect.
10 – 32000 (msec) Rotate to right for stronger effect.
10 – 32000 (msec) Rotate to right for stronger effect.
1 – 100 (%) Rotate to right for stronger effect.
1 – 100 (%) Rotate to right for stronger effect.
10 – 32000 (msec) Rotate to right for increased resonance and
more unusual sound.
10 – 32000 (msec) Rotate to right for increased resonance and
more unusual sound.
10 – 32000 (msec) Rotate to right for increased resonance and
more unusual sound.
10 – 32000 (msec) Rotate to right for increased resonance and
more unusual sound.
1 – 100 (msec) Change threshold level. Rotate to right for
stronger effect.
EFFECT FUNCTIONS
Parameter 2 (MIX/DEPTH dial)
Explanation
<DRB1350> <DRB1350>
41 41
En/Fr En