Translation of the original instructions
SAFETY INSTRUCTIONS
This manual contains safety and operating instructions, to be
followed for your safety. Please read it carefully before using
the device for the first time and keep it in a safe place for future
reference. Read and understand the following safety recom-
mendations before using or servicing the unit. Any change or
servicing that is not specified in the instruction manual must not
be undertaken. The manufacturer is not liable for any injury or
damage caused due to non-compliance with the instructions
featured in this manual . If there is any issue or uncertainty,
please consult a qualified individual to operate the equipment
correctly. This machine should only be used for operations
comprised within the limits indicated on the machine and in
the instruction manual. The operator must observe the safety
precautions. In case of inedaquate or unsafe use, the manufac-
turer cannot be held liable for damage or injury. Any other
uses not specified in this manual is forbidden, and possibly
dangerous. The product is semi automatic and requires the
presence of an operator.
This unit can be used by children aged 8 or over and by peo-
ple with reduced physical, sensory or mental capabilities or
lack of experience or knowledge, if they are properly mon-
itored or if instructions for using the equipment safely have
been read and risks made aware of. Children must not play
with the product. Cleaning and maintenance should not be
performed by an unsupervised child.
Ne pas utiliser l'appareil, si le cordon d'alimentation ou la
fiche de secteur sont endommagés.
Ne pas couvrir l'appareil.
Do not obstruct the cooling vents. Refer to the installation sec-
tion before operating the machine.
Fire and explosion risks!
• Do not use the device in an explosive atmosphere.
• Keep airbags, gas cannisters or other pressurised gas con-
tainers away from the induction heating machine.
Warning, heat and flame risk.
• Do not overheat parts and adhesives.
• Be wary of fire, keep a fire extinguisher is in the vicinity..
• Do not position the machine on, or near flammable surfaces.
• Do not position the machine near flammable materials.
Warning ! Very hot surface. Risk of burns.
• The parts and pieces that have just been heated are hot
and may cause burns when manipulated.
• Do not touch any hot parts with your hands.
• Wait for the parts and pieces to cool down before handling
them.
POWERDUCTION 10R
EN
9