GYS 068643 Traducción De Las Instrucciones Originales página 14

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
Translation of the original instructions
It works in the same way as coils and braided wire. Its shape must be adjusted to fit the metal piece's shape and if
possible, circle around the piece several time for maximum efficiency.
1
OPTIONAL ACCESSORIES
RECOMMENDATIONS
• When heating the coils for the first time, some smoke will be released.
• Avoid heating for more than 30s, the coils will heat excessively and suffer premature damages.
• It is not necessary to come in contact with the bolt to heat it.
• The coil's protective fabric is fragile, it is glass fabric : make sure to store the coils in such a way that they do not
get damaged.
The coils heat very fast. After use, is is recommended to let them cool down before storing them. Ma-
nipulate with gloves to prevent burns or itches caused by the glass fabric.
Do not place a finger or any limb inside or close to the coil when the machine is switched on. Magnetic
fields should be considered.
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
• Removable inductors and ferrites that are consumables.
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
14
POWERDUCTION 10R
066601
Adhesive-removal inductor
079472
Ferrite inductor for all types of ferrous metals.
079489
Replacement ferrite
3
2
fig.2
EN
1- Button
2- Tightening wheels
3- Spirale
loading

Este manual también es adecuado para:

Powerduction 10r