Operating the roof air conditioner
Switching only the remote control to or from stand-by
In stand-by mode, the remote control display shows only the time.
If the remote control is not pointing to the IR receiver (fig. 2
control panel, you can activate the remote control or switch it to stand-by
independently from the roof air conditioner:
➤ Press the
button.
9.3
Hint for improved use
The following hints will optimise the performance of your roof air conditioner:
• Improve the heat insulation of your vehicle by sealing gaps and hanging reflective
blinds or curtains on your windows.
• If the vehicle has been subjected to direct sunlight for a long time: Operate the
roof air conditioner in the "Circulating air" (
a while before switching on the "Cooling" (
• Avoid opening doors and windows as far as possible in the "Cooling" (
mode.
• Align the air nozzles sensibly.
• Make sure the air nozzles and intake grille are not covered by cloths, paper or
other objects.
9.4
Switching the roof air conditioner on and off
I
NOTE
When it is switched on, it begins to condition the air to the values that
were set most recently.
28
page 3) on the
4,
) mode with the windows open for
) air conditioning mode.
FreshJet
)
EN