Idiomas disponibles
Idiomas disponibles
•
Remove and empy the drip tray (A8), then reposition it in
the machine.
•
Empty the water tank (A2) (if present, remove the water
softener filter).
•
Pour the descaler into the water tank up to the level 'A'
marked on the inside of the tank (corresponding to the
contents of one 100 ml pack).
•
Add water (1 litre) up to level 'B' . Now reposition the water
tank in the machine.
•
Make sure the filter holder (A14) is not attached and posi-
tion a recipient under the hot coffee spout (A7) and steam
wand (A5).
•
Press and hold the
onds.
•
Press
(B6) button; the
and the
indicator light turns orange.
•
Press and hold the
descaling. The indicator light (B6) starts blinking.
•
Turn the steam dial to the
•
The descale programme starts and the descaler liquid co-
mes out of the steam wand and coffee spout . The descale
programme removes limescale deposits from inside the ap-
pliance by automatically performing a series of rinses and
pauses until the water tank is empty.
Please note: During descaling, to clean the coffee spout, close
the steam dial from time to time to deliver small quantities of
descaler from the coffee outlet.
•
Delivery stops and the
indicator light turns white.
•
Fill the water tank to MAX level with fresh water and empty
the recipient used to collect the descaler solution and re-
place it empty.
•
Press the
(B6) button to start the rinse cycle and turn
the steam dial.
Please note: During rinse cycle to clean the coffee spout, close
the steam dial from time to time to deliver small quantities of
water from the coffee outlet.
•
When the rinsing process is over, the (B3) indicator light
goes out and descaling is complete and the appliance is
ready to use.
•
Turn the steam dial back.
Please note: If you accidentally activate descaling, you can stop
it by pressing and holding the
seconds.
(B1) and
(B4) buttons for 3 sec-
(B3) indicator light blinks
(B6) button for 3 seconds to start
position .
(B2) indicator light turns on, the
(B6) button for at least 10
9. TECHNICAL DATA
Voltage:
Absorbed power:
Max. water tank capacity:
Size LxDxH:
Weight:
10. STATISTICS
This mode allows you to have all the statistics data.
•
Make sure the machine is turned off.
•
Press and hold the
simultaneously press the On/Off switch (A6) to enter the
Statistics settings.
•
Press the following buttons to select the appliance's data:
Buttons
water quantity delivered (liters)
total numbers of coffee beverages
total numbers of steam delivered
10.1 Indicator light
number of blinks to indicate units (from 1 to 9)
number of blinks to indicate tens (from 10 to 90)
number of blinks to indicate hundreds (from 100 to
900)
number of blinks to indicate thousands (from 1000 to
9000)
number of blinks to indicate tens of thousands (from
10000 to 90000)
9
220-240V~ 50-60Hz
1450W
1.6 l
189x346x328 mm
4.5 kg
(B5) button for 3 seconds and
Data
total numbers of descalings
