Taurus I3021T Instrucciones De Uso página 38

Downloaded by: pd-oliana on 30-01-2023 15:52 CET
display screen flashes
"u".
Heating areas on one
side (first or second
area) display "u".
Heating areas on one
side (first or second
area) display "u".
Never dismantle the hob yourself.
Before calling customer services, make sure that the hob is connected correctly. The warranty
does not cover any of the following cases:
Damage caused by incorrect installation.
Damage caused by unauthorised dismantling and/or repair.
Damage caused by misuse.
Use of the hob for commercial purposes.
The following are the error codes that may appear on the hob in the event of a fault:
Code Problem
Temperature sensor error - open
E1
circuit
Temperature sensor error - short-
E2
circuit
E7 Temperature sensor error
C1 Sensor temperature too high
IGBT temperature sensor error -
E3
Open circuit
IGBT temperature sensor error -
E4
short-circuit
C2 IGBT temperature too high
Supply voltage is lower than the rated
EL
voltage.
Supply voltage is higher than the
EH
rated voltage.
The detection circuit is damaged.
Power board and display board
connection fault
The screen communication board
is damaged.
The main board is damaged.
I3021T
The unit has overheated
Wait for temperature to
return to normal.
Press the "ON/OFF" button
to restart the unit.
Replace the
power supply
board.
Check the connection.
Replace the display board.
Replace the main board.
Solution
Check the connection or replace the
hob's temperature sensor
Wait for the hob temperature to return
to normal.
Touch the "ON/OFF" button to restart
the unit.
Replace the power supply board.
Wait until the IGBT temperature
returns to normal Use the "ON/OFF"
control to restart the appliance. Check
that the fan is working correctly.
Otherwise replace the fan.
Check to see whether the power
supply is normal. Switch on after the
power supply returns to normal.