Idiomas disponibles
Idiomas disponibles
Downloaded by: pd-oliana on 30-01-2023 15:52 CET
Make sure that the base of the cookware is smooth, sits flat on the hob and is the same size as
the cooking area. If smaller diameter cookware is used, efficiency may be lower than expected.
Always place the cookware in the centre of the cooking area.
Always lift the cookware, do not slide it as this may scratch the glass.
Only use cookware with a base suitable for induction, look for the symbol on the packaging or on
the bottom of the cookware.
A magnet can be used to check the cookware. If the magnet is attracted to the base, then the
cookware is suitable for induction.
Some cookware is not suitable for induction because only certain parts of the bottom are made of
magnetic material. Areas with no magnetic material may heat up differently, resulting in poorly
cooked food. Occasionally, the hob may not recognize the cookware and the cooking area in
question may fail to switch on.
TIMER FUNCTION
The appliance's operating time can be controlled up to 99 minutes.
1 Select the corresponding cooking area by using the corresponding area selection button
2 Press the timer selection control
3 To program in an operating time, simply use the + - buttons the + - buttons to change the timer
setting. The programmed time or remaining time will be displayed. Use the + - buttons to change
the timer setting.
4 Once the time is selected, the countdown starts immediately. After 5 seconds the indicator
returns to showing the power indicator. A red dot appears next to it to show that area is using the
timer.
5 If you need to check or modify the time, repeat steps 1 and 2
