Interrupting The Charging Process; Resuming Charging - Fronius XCharge_professional Manual De Instrucciones

In both cases, it is advisable to use Pb Refresh mode to reactivate deep-discharged bat-
teries. For more information, see the "Pb Refresh mode" section.
7
Interrupting the
charging process
Resuming charg-
ing
62
CAUTION! Risk of sparks if the charging leads are disconnected too soon. Before
disconnecting the charging leads, press the Stop/Start key to end the charging
process.
6
Disconnecting the charger
- Disconnect the black charging lead from the negative pole (-) of the battery
- Disconnect the red charging lead from the positive pole (+) of the battery
NOTE! Risk of damage to connection sockets and connecting plugs. Do not dis-
connect or unplug charging leads while charging.
1
2
For battery voltages lower than 8.4 V, a
message appears recommending the use
of Pb Refresh mode.
To end the charging process:
- Press the Stop/Start key
Press the Stop/Start key while charging
- The charging process is interrupted
Press the Stop/Start key
- The charging process is resumed