Idiomas disponibles
Idiomas disponibles
Checking the digital signal
strength
This TV will allow you to view the digital signal meter for
digital channels.
1
Select "Channel
Signal Meter", then press
2
The digital signal strength screen will appear.
If necessary, adjust the direction of the antenna to obtain the
maximum signal strength.
CH
Signal Meter
0
Signal Level
NOTE:
•
Signal meter feature is not available for analog channels.
•
After 240 seconds the Signal Meter screen will clear and the TV
will return to normal viewing automatically.
Labeling channels
Channel label appears with the channel number display each
time you turn on the TV, select a channel, or press DISPLAY.
You can choose any four characters to identify a channel.
To create channel labels
1
Select "Channel
Channel Labels", then press
2
Press
or
to select a channel you want to label, then press .
CH
Channel Labels
Channel Number
Channel Label
Label Clear
3
Press
or
repeatedly until the character you want appears
in the first space.
CH
Channel Labels
Channel Number
Channel Label
Label Clear
The characters rotation as follows:
-
SPACE
If the character which you desire appears, press ENTER.
Repeat this step to enter the rest of the characters.
If you would like a blank space in the label name, you must
choose the empty space from the list of characters.
4
Repeat steps 2-3 for other channel. You can assign a label to
each channel.
5
When you finish inputting the label name, press EXIT to return
to the normal screen.
J3PB0321A_EN.indd 17
All manuals and user guides at all-guides.com
or ENTER.
50
100
or ENTER.
15-1
CH-1
>>
15-1
CH-1
>>
, () @ / + = -
To clear a Channel Label
After step 2 above, press
or
press
or ENTER.
NOTE:
•
The channel labels will be reset after "Scan" on page 16.
Labeling video inputs
The Video Label feature allows you to label each input
source for your TV.
1
Select "Setup
Video Label", then press
2
Press
or
to select an input which you want to label.
3
Press
or
to select the desired label for that input source.
Video Label
Video1
-
Video2
-
Component
-
HDMI1
-
HDMI2
-
PC
-
Available video labels: / VCR / DVD / STB / Cable / Satellite /
Receiver / Game / Camcorder / PC / DVI PC / Blu-ray
Setting the Parental Control
An age limitation can be set to restrict children from
viewing or hearing violent scenes or pictures that you may
choose to exclude. The restriction applies to "TV", "Movie",
"CAN ENG Rating" and "CAN FRE Rating" (if this data is
transmitted). You may set this restriction separately. To use
the Parental Control function, you must register a password.
To register a password
1
Select "Locks", then press
2
Select and enter your password (4 digits) using Number
buttons (0-9), then press ENTER.
Locks
* * * _
New Password
" " appears instead of the number.
3
Enter the same password again to confirm, then press
ENTER.
The password is now registered.
NOTE:
•
If you forget the password, contact Customer Service at
1-800-289-0981 (USA/Canada), 01-800-703-0885 (MEXICO)
for assistance.
Your original remote control will be required.
•
To avoid forgetting the password, write it down and keep in a
safe place.
to select "Label Clear", then
or ENTER.
or ENTER.
17 EN
7/9/12 9:40:44 AM
