Idiomas disponibles
Idiomas disponibles
• The appliance is manufactured to current safety standards.
• The appliance may not be used for any other purpose than the
one for which it was built, i.e. as an extractor induction hob
for cooking food and extraction of cooking fumes, installed in
household kitchens.
• Any liability of the manufacturer for damage caused to persons,
animals or property due to incorrect installation, maintenance or
improper use is excluded.
• Before connecting the appliance to the mains supply, check the
nameplate (located on the underside of the appliance) to ensure
that the voltage and wattage correspond to those of the mains
supply and that the connection socket is suitable. If in doubt,
consult a qualified electrician.
CAUTION
Before any cleaning or maintenance operations or during
thunderstorms, disconnect the appliance, setting the system's
main switch to "off" (Fig.1) or pulling out the plug (Fig.2).
Fig. 1
Fig. 2
• When the extractor hob is in operation, the parts of the extractor
hob adjacent to the induction plates may also become hot.
• There is a possibility of fire if cleaning is not carried out according
to the instructions.
• The appliance must not be cleaned with steam or high pressure
appliances.
• Putting any objects through the glass intake flap (Fig.3) is
prohibited.
• Do not use the appliance to heat the room.
• Make sure that the electrical connections of other appliances
in the immediate vicinity do not come into contact with the hot
appliance.
• Pulling, unplugging or twisting the electrical cables coming out
of the appliance is prohibited, even if it is disconnected from the
mains supply.
• Hob hoods and other cooking fume extractors can adversely
affect the safe operation of appliance that burn gas or other
fuels (including those in other rooms) due to the return flow of
combustion gases. These gases can potentially cause carbon
monoxide poisoning. After installation of a hood or other kitchen
fume extractor, the operation of gas appliances with flow should
be tested by a competent person to ensure that no return flow of
combustion gases occurs.
• Cooking with a flame is prohibited.
• To avoid any unwanted disturbance on the control panel ("TC"
Touch Control), place suitable pots centred to the marked points
in the glass-ceramic surface (Fig. 4).
Precautions before use.
• Unpack all materials.
• Appliance installation and connection must be carried out by
authorised specialists.
• The manufacturer cannot be held liable for damage caused by
installation or connection errors.
• To be used, the appliance must be properly equipped and
installed in a kitchen unit and on an adapted and approved
work surface.
• This appliance is intended exclusively for cooking food and
excludes any other domestic, commercial or industrial use.
• Remove all labels and stickers from the ceramic glass.
• Do not change or alter the appliance.
• The cooking plate may not be used as self-supporting or as a
work surface.
• The appliance must be earthed and connected in accordance
with local standards.
• Do not use extension cords or power strips to connect it.
• The appliance may not be used above a dishwasher or tumble
dryer: steam can damage electronic appliances.
Fig. 3
2 - WARNINGS
EN
3
