Idiomas disponibles
Idiomas disponibles
Time to charge battery....................................60 min
Battery capacity.....................................................2 or 4 A
Disc.....................................................D100xD22x4mm
Routing depth......................................................20 mm
Weight...........................................................................3 kg
Weighted equivalent continuous acoustic
pressure level A.............................................................92 dBA
Acoustic power level A...............................................103 dBA
Uncertainty...................................................................K: 3 dBA
Wear ear protection!
Vibration total values.........................................a
Uncertainty..........................................................K: 1,5 m/s
3. SPECIFICATIONS OF THE TOOL
Brushless motor
Power tool equipped with a brushless motor that pro-
vides the following advantages (compared to the power
tool having a brush motor):
• High reliability due to the lack of wearing parts (car-
bon brushes, commutator).
• Increased operating time on a single charge.
• Compact design and light weight.
Temperature protection
The temperature protection system enables to auto-
matically deactivate the power tool in case of excess
load or when the temperature of the battery 7 (Fig. 38)
is exceeding 70°C. The system guarantees protection of
the power tool from damage in case of noncompliance
with the operation conditions.
Overdischarge protection
The battery 7 (Fig. 38) is protected by the safety system
against deep discharge. In case of complete discharge,
the power tool is automatically switched off.
Do not try to switch on the power tool
when the protection system is activated
the battery 7 (Fig. 38) can be damaged.
Indicators of the state of battery charge (Fig. 5)
With the push of the button 6 the indicators 5 show
the state of charge of the battery 7.
Overheating protection
Overheating protection system of the engine automati-
cally switches off the power tool in case of overheating.
In this situation, let the tool cool before turning the
power tool on again.
Overload protection
Overload protection system of the engine automatically
switches off the power tool when it is operated in a man-
ner that causes it to draw an abnormally high current.
h
Soft start
Soft start enables smooth start of power tools - is
being run up gradually with no jerks and kickbacks; no
jump-like load is imposed on the motor upon switching.
4. HOW TO CHARGE THE BATTERY
: 4,7 m/s
2
Initial operating of the power tool
h
2
Before the first use, the battery 7 (Fig. 38) must be
fully charged.
Charging process (Fig. 39)
• Press the battery lock 4 and remove the battery 7
(Fig. 38).
• Connect the charger 19 to the power supply.
• Insert battery 7 into charger 19 (Fig. 39).
• Disconnect the charger 19 from power supply after
charging.
• Remove the battery 7 from the charger 19 and mount
battery 7 in the power tool.
Charger indicators (Fig. 40)
Charger indicators 21 and 22 inform of the battery 7
(Fig. 38) charging process. Signals of the indicators 21
and 22 are shown on the label 20. (Fig. 40).
• Fig. 40.1 - (The green indicator 22 is on, the battery
7 is not inserted in the charger 19) - the charger 19 is
connected to the power network (ready for charging).
• Fig. 40.2 - (The green indicator 22 is blinking, the
battery 7 is inserted in the charger 19) - the battery 7
is being charged.
• Fig. 40.3 - (The green indicator 22 is on, the battery 7 is
inserted in the charger 19) - the battery 7 is fully charged.
• Fig. 40.4 - (The red indicator 21 is on, the battery 7
is inserted in the charger 19) - the charging process of
the battery 7 is terminated due to inappropriate tem-
perature. When the temperature conditions are normal,
the process of charging will resume.
• Fig. 40.5 - (The red indicator 21 is blinking, the battery
7 is inserted in the charger 19) - the charging process
of the battery 7 is terminated because of its failure.
Replace the faulty battery 7, its further use is prohibited.
In the process of charging the battery 7 and the charger
19 become hot, it is a normal process.
5. STARTING UP THE MACHINE
To start up the machine, push button forward (Fig. 14)
to the on position.
To stop the machine, simply press the back of the switch
and it will return to the off position.
Battery charging time
17
