Codes And Standards - WEG CFW500 Manual Del Usuario

8.2.1 Codes and Standards

Safety
„
standards
„
„
„
„
„
„
Electromagnetic
„
compatibility (EMC)
standards
„
„
„
„
„
„
„
Mechanical
„
construction
„
standards
Table 8.2: Codes and standards
UL 508C - power conversion equipment.
UL 840 - insulation coordination including clearances and creepage distances
for electrical equipment.
EN 61800-5-1 - safety requirements electrical, thermal and energy.
EN 50178 - electronic equipment for use in power installations.
EN 60204-1 - safety of machinery. Electrical equipment of machines. Part 1:
general requirements.
Note: for the machine to comply with this standard, the manufacturer of the
machine is responsible for installing an emergency stop device and equipment
to disconnect the input power supply.
EN 60146 (IEC 146) - semiconductor converters.
EN 61800-2 - adjustable speed electrical power drive systems - part 2: general
requirements - rating specifications for low voltage adjustable frequency AC
power drive systems.
EN 61800-3 - adjustable speed electrical power drive systems - Part 3: EMC
product standard including specific test methods.
EN 55011 - limits and methods of measurement of radio disturbance
characteristics of industrial, scientific and medical (ISM) radio-frequency
equipment.
CISPR 11 - industrial, scientific and medical (ISM) radio-frequency equipment
- electromagnetic disturbance characteristics - limits and methods of
measurement.
EN 61000-4-2 - electromagnetic compatibility (EMC) - part 4: testing and
measurement techniques - section 2: electrostatic discharge immunity test.
EN 61000-4-3 - electromagnetic compatibility (EMC) - part 4: testing and
measurement techniques - section 3: radiated, radio-frequency, electromagnetic
field immunity test.
EN 61000-4-4 - electromagnetic compatibility (EMC) - part 4: testing and
measurement techniques - section 4: electrical fast transient/burst immunity test.
EN 61000-4-5 - electromagnetic compatibility (EMC) - part 4: testing and
measurement techniques - section 5: surge immunity test.
EN 61000-4-6 - electromagnetic compatibility (EMC) - part 4: testing and
measurement techniques - section 6: Immunity to conducted disturbances,
induced by radio-frequency fields.
EN 60529 - degrees of protection provided by enclosures (IP code).
UL 50 - enclosures for electrical equipment.
Technical Specifications
CFW500 | 43