Safety; Safety Marking; Safety Devices; Safety Notices - Tecno-gaz Europa B EVO Instrucciones De Uso

2
2.1

Safety Marking

2.2

Safety Devices

The following safety devices are installed:
-) Safety valve set at 2.4 bar 0/+10%
-) Electromagnetic lock to prevent the door from opening while the cycle is running
-) Resistance over temperature thermostats
2.3 Safety Notes
• • • • The manufacturer is liable for the marketed product in accordance with current
regulations. The manufacturer's liability will expire when operations are carried out on
the device, or a part of it, by unskilled personnel or using non-original spare parts.
• • • • There should be no potential risk of explosion and/or fire in the room where the
autoclave is installed.
• • • • The autoclave should be installed in a special well-ventilated room.
• • • • The incubator's connector (FIG.2-pos.18), should be used only for the B-TEST.
Since it is a 230 V a.c. connection independent from the main switch, do not
touch the connector with wet or moist hands and protect it against possible
water splashes.

SAFETY

HAZARDOUS VOLTAGE
DISCONNECT THE POWER
BEFORE REMOVING THE LID
HIGH TEMPERATURE
EARTH CONNECTION
ENGLISH
7