Resetting The Display - Stahlwille SmartCheck USB/DAPTIQ Instrucciones De Uso

Operation
➢ If you do not want to use this function, select "OFF".
➢ Release the buttons.

Resetting the display

To reset the DPG's display (to zero it), proceed as follows:
➢ Press the "CLEAR HOLD POWER" button once.
The display is set to zero.
Alternatively, the display can be reset automatically.
➢ To do this, remove the torque wrench from the recessed square so
that no torque is applied between the tests.
When the torque wrench is inserted back in the recessed square and
is actuated, the display is automatically reset and the current torque
is displayed.
80