Idiomas disponibles
Idiomas disponibles
Fastening the DPG and preparing for
operation
Fastening the DPG
The DPG is suitable for vertical or horizontal installation. Vertical or
horizontal refers to the position of the transducer axis.
STAHLWILLE recommends fastening the DPG the vertical
transducer axis position.
To be able to work with the TT, you must fasten it securely first of all.
The base must be sufficiently solid, e.g. a worktop. The worktop
must be approx. 30 to 50 mm thick.
Use the following for fastening:
• Two cheese-head screws with M10 hexagon socket according to
ISO 4762, material strength: 10.9
• Two washers
• Two M10 hexagon nuts, material strength: 10.9
CAUTION
Broken bones, bruises and crushing during assembly.
The DPG can fall down during handling.
➢ Wear safety shoes with steel toecaps.
CAUTION
Risk of injury due to inadequate fastening of the DPG.
The DPG can fall down.
➢ Fasten the DPG securely.
➢ Wear safety shoes with steel toecaps.
Fastening the DPG and preparing for
operation
63
