Introduction - Mondolfo Ferro MT 2450 Manual De Uso

INTRODUCTION

The purpose of this manual is to provide the owner and operator of this machine with
a set of safe and practical instructions for the use and maintenance of the balancing
machine.
Follow all of the instructions carefully and your machine will assist you in your work
and give long-lasting and efficient service, in keeping with the builder traditions.
The following paragraphs define the levels of danger regarding the machine,
associated with the warning captions found in this manual.
DANGER
Refers to immediate danger with the risk of serious injury or death.
WARNING
Dangers or unsafe procedures that can cause serious injury or death.
ATTENTION
Dangers or unsafe procedures that can cause minor injuries or damage to property.
Read these instructions carefully before using the machine. Keep this manual and the
illustrated material supplied with the machine in a folder near the place of operation,
where it is readily accessible for consultation by the machine operator.
The technical documentation supplied is considered an integral part of the machine; in
the event of sale all relative documentation must remain with the balancing machine.
The manual is only to be considered valid for the machine of the model and serial
number stated on the nameplate applied to it.
WARNING
Adhere to the contents of this manual: Corghi declines all liability in the case of
actions not specifically described and authorised in this manual.
NOTE
Some of the illustrations in this manual have been taken from photographs of
prototypes; the standard production model may differ slightly in certain respects.
These instructions are for the attention of personnel with basic mechanical skills. We
have therefore condensed the descriptions of each operation by omitting detailed
instructions regarding, for example, how to loosen or tighten the fixing devices on the
GB
machine. Do not attempt to perform operations unless properly qualified and with
suitable experience. In case of need, please contact our nearest authorised Service
Centre for assistance.
MT 2450 operator's manual 51