Compressed Air Hook-Up; Safety Regulations - Mondolfo Ferro MT 2450 Manual De Uso

COMPRESSED AIR HOOK-UP

WARNING
Compressed air hook-up is only envisaged if the compressed air ring-nut (optional
accessory) is present.
WARNING
All operations involved in making the compressed air connections to the machine
must only be carried out by qualified staff.
- The connection to the workshop compressed air system must ensure a minimum
pressure of 6 bar.
- The union for connection to the compressed air system is of universal type and
therefore no special or additional couplings are required. Fix a pressure-resistant
hose having inside diameter 6 mm and outside diameter 14 mm to the notched union
using the hose clamp provided with the machine.
WARNING
Failure to observe these instructions and the relative danger warnings can cause
serious injury to the operator or other persons.
Do not use the machine until you have read and understood all the danger/warning/
attention notices in this manual.
This machine must be used only by qualified and authorised personnel. A qualified
operator is construed as a person who has read and understood the manufacturer's
instructions, is suitably trained, and is conversant with safety and adjustment
procedures to be adhered to during operations. Operators are expressly forbidden
from using the machine under the influence of alcohol or drugs capable of affecting
physical and mental capacity.
The following conditions are essential:
- read and understand all the instructions on how to use the machine;
- have a thorough knowledge of the capacities and characteristics of the machine;
- keep unauthorised persons well clear of the area of operation;
- make sure that the machine has been installed in compliance with established
legislation and standards;
- make sure that all machine operators are suitably trained, that they are capable of
using the machine correctly and that they are adequately supervised during work;
- do not touch power lines or the inside of electric motors or other electrical
equipment until the power has been disconnected;
- read this manual carefully and learn how to use the machine correctly and safely;
- always keep this manual in a place where it can be readily consulted when working
with the machine and do not fail to refer to the manual whenever in need of
confirmation or explanations.
56

SAFETY REGULATIONS

MT 2450 operator's manual