Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ChefTop
Hard blast freezing program "-18H"
Shock freezing program with -18°C of core temperature
and -40°C of chamber temperature; when the blast chill-
ing program is over, the chamber program is kept at -
20°C.
"NO ICE" Program
This program allows the user to defrost the evaporator:
the evaporator fan and the door heating element until the
chamber temperature reaches +3°C.
4. CONNECTION WITH THE EXTERNAL
WORLD
The digital control panel of the "Chef Top" ovens has
been preset to easily connect the oven to the external
world through the present and future systems of commu-
nication: USB, Bluetooth, serial connections, etc.
The USB interface kit XC226 is available and allows the
following functions:
•
Insertion of blast chilling / shock freezing programs
•
Changes in operational parameters (ex: probe set-
ting)
•
Diagnostics of problems
•
Saving of the trends with regard to temperatures
inside the oven chamber or inside the blast chiller
chamber (necessary data for HACCP system)
ENGLISH
ENGLISH
7
8
™
5. ROUTINE MAINTENANCE
5.1 CONDENSER FILTER CLEANING
6. SPECIAL MAINTENANCE
7. DISCONNECTION IN CASE OF MAL-
•
Connection to a printer (HACCP)
You can find further information included in the kit.
The appliance must be regularly serviced (at least once a
year) by a qualified UNOX service technician.
Any maintenance operations must be carried only by a
qualified UNOX technician.
Before starting any maintenance operation, it is necessary
to disconnect the appliance from the electrical power
supply and allow it to cool down.
The condenser filter can be washed with soap and water
or in the dishwasher at temperature lower than 50 °C.
The condenser filter has to be cleaned every 300 hours of
functioning of the appliance: after 300 hours have passed,
the display panel 1 of the control board shows the mes-
sage EA4.
Press and hold both the
onds to reset the EA4 messa1ge.
All maintenance operations must be only be carried out
by a qualified UNOX technician.
Before starting any maintenance operation it is necessary
to disconnect the appliance from the electrical power
supply and allow it to cool down.
Removal of the back panel will allow access to all internal
components for service and maintenance.
FUNCTION
In case of malfunction it is necessary to disconnect the
appliance:
•
switch off the electrical power supply isolator switch,
that is between the appliance and the network
contact your nearest UNOX service centre.
•
ENGLISH
and
buttons for 3 sec-
Tabla de contenido
