Instructions For The In- Staller - Unox ChefTop XK304 Manual De Instrucciones

ChefTop
B. INSTRUCTIONS FOR THE IN-
STALLER
1. WARNING
All the operations of installation, assembly, service and
assistance must be carried out by qualified personnel ac-
cording to current laws and regulations.
Please read carefully the instruction manual before the
installation and commissioning of the appliance.
The appliance must be unaltered (check for any transport
damage).
Remove all informative material from the chamber.
2. PRELIMINARY OPERATIONS
2.1 INSTALLATION SITE
Before placing the appliance, please verify the overall di-
mensions and the exact position of the electrical and wa-
ter connections and of the fumes exhaust as indicated on
the attached file "Technical Data".
2.2 PRESETTING FOR POSITIONING
The feet are already assembled on the blast chiller.
Never use the appliance without its original feet.
2.3 REMOVAL OF THE PROTECTIVE FILM
Carefully remove all the protective film from the external
walls of the appliance.
Pay attention not to leave any residue of glue. If there
should be any residue of glue, please remove it with an
appropriate solvent.
Remove the probe protection.
2.4 POSITIONING
Place the appliance respecting the safety standards indi-
cated below.
Place the appliance so that its back can be easily reached
ENGLISH
ENGLISH
7
8
™
in order to make the electrical connections and to pro-
vide the necessary service.
The appliance is not suitable for built-in installation or
side by side positioning.
It is recommended to leave 5 cm of free space all around
the appliance.
Do not install the appliance near a fryer.
Verify that the appliance is installed on a flat and level sur-
face (level the blast chiller position by regulating the feet
height).
The blast chiller has to be installed under a ChefTop™
series oven.
Ensure that the four pins located on the corners of the
blast chiller top cover engage in the holes of the four oven
feet. (see the picture here below).
Fix the blast chiller to the oven by using the two L brack-
ets supplied (the brackets have to be fixed to the oven
and the blast chiller with the self-threading screws sup-
plied) (see the picture here below).
ENGLISH