Idiomas disponibles
Idiomas disponibles
6.2
Setting the display backlight
⇒ Select the SETTINGS menu.
en
⇒ Press the button with the light bulb icon
⇒ Adjust the brightness using the slide control or switch it on or off using the
buttons�
⇒ Press the lower left arrow
6.3
Activating the fan
⇒ Select the SETTINGS menu.
⇒ Press the button with the fan icon
⇒ The fan can be selected by pressing the arrow buttons
♦ The name of the fan to be controlled is shown on the display:
- Object fan
- Extruder fan
- Case fan
⇒ Set the rotational speed using the slide control or switch it off / set the maxi-
mum rotational speed using the
The rotational speed of the extruder fan can only be reduced when the ex-
truder temperature is below 60 °C [140 °F].
The extruder and case fans are automatically switched off again after 60
seconds.
The setting of the object fan can also be modified during printing.
In Renfert mode, the printing parameters are stored for a perfect printing result. All of the nec-
essary settings for orthodontic applications are optimally pre-configured and tailored to the
filament. This ensures a high level of process reliability and simplicity. If the fan settings are
changed, the pre-installed parameters are modified during printing. This can impair print quality,
cause misprints, or cause damage to the printer.
⇒ Press the lower left arrow
6.4
Audio settings
⇒ Select the SETTINGS menu.
⇒ Use the right arrow
⇒ Press the button with the bell icon
⇒ Use the arrows
- Sound: On
- Sound: Off
- Warnings only
⇒ Press the lower left arrow
6.5
The cover menu
⇒ Select the SETTINGS menu.
⇒ Use the right arrow
⇒ Press the button with the cover icon
♦ When the cover is mounted, you can activate the cover fan here by pressing
the ON/OFF button.
♦ If the cover fan has been enabled, it is switched on during a print job�
⇒ Press the lower left arrow
The cover fan is enabled by default on delivery.
If it is deactivated, heat can build up during the printing process causing misprints.
�
�
until you are back in the main menu�
�
�
/
buttons�
until you are back in the main menu�
�
to go to page 2 (as shown here in the image).
�
/
to choose between three options:
until you are back in the main menu�
�
to go to page 3 (as shown here in the image).
�
until you are back in the main menu�
/
at the top:
- 20 -
/
Fig. 41
Fig. 42
Fig. 43
Fig. 44
Fig. 45
