Dyson HH11 Manual De Instrucciones página 36

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 40
EN
USING YOUR DYSON MACHINE
PLEASE READ THE 'IMPORTANT SAFETY INSTRUCTIONS' IN YOUR DYSON
USER MANUAL BEFORE PROCEEDING.
OPERATION
Do not use outdoors or on wet surfaces or to vacuum water or other liquids – electric
shock could occur.
Ensure the appliance remains upright in use and in storage. Dirt and debris may
be released if it is turned upside down.
Do not operate while checking for blockages.
For domestic indoor and car use only. Do not use it whilst the car is in motion or
while driving.
To operate the Max mode, locate the switch on the top of the appliance. Slide
the switch to the Max mode position.
To switch off Max mode, slide the switch back to the Powerful suction mode position.
Your machine has carbon fibre brushes. Take care if coming into contact with them,
as they may cause minor skin irritation. Wash your hands after handling the brushes.
DIAGNOSTICS – LIGHTS DURING CHARGING
Solid blue: Charging.
Flashing blue: Not charging – Refit charger or try another
socket. If warning light persists, contact the Dyson Helpline.
Lights off: Charging complete.
Solid amber: Not charging, temporary fault
(e.g. too hot/cold).
Flashing red: Fault (contact the Dyson Helpline).
DIAGNOSTICS – DURING USE
Solid blue: 'ON'.
Flashing blue: No power, charge battery.
Flashing amber: No power, temporary fault
(e.g. too hot/cold).
Solid amber: Fault (contact the Dyson Helpline).
Flashing red: Fault (contact the Dyson Helpline).
CARPETS OR HARD FLOORS
Before vacuuming your flooring, rugs and carpets, check the manufacturer's
recommended cleaning instructions.
The brush bar on the machine can damage certain carpet types and floors.
Some carpets will fuzz if a rotating brush bar is used when vacuuming. If this
happens, we recommend vacuuming without the motorised floor tool and consulting
with your flooring manufacturer.
Before vacuuming highly polished floors, such as wood or lino, first check that the
underside of the floor tool and its brushes are free from foreign objects that
could cause marking.
LOOKING AFTER YOUR DYSON MACHINE
Do not carry out any maintenance or repair work other than that shown in
your Dyson User manual, or advised by the Dyson Helpline.
Only use parts recommended by Dyson. If you do not, this could invalidate
your guarantee.
Store the appliance indoors. Do not use or store it below 3°C (37.4°F). Ensure
the appliance is at room temperature before operating.
Clean the appliance with a dry cloth only. Do not use any lubricants, cleaning agents,
polishes or air fresheners on any part of the appliance.
USING YOUR MACHINE
Do not use without the clear bin and filter(s) in place.
Fine dirt such as flour should only be vacuumed in very small amounts.
Do not use the appliance to pick up sharp hard objects, small toys, pins, paper clips,
etc. They may damage the appliance.
When vacuuming, certain carpets may generate small static charges in the
clear bin or wand. These are harmless and are not associated with the mains
electricity supply. To minimise any effect from this, do not put your hand or
insert any object into the clear bin unless you have first emptied it. Clean the
clear bin with a damp cloth only. (See 'Cleaning the clear bin'.)
36
Use extra care when cleaning on stairs.
Do not rest the appliance on chairs, tables, etc.
Do not press down on the nozzle with excessive force when using the appliance
as this may cause damage.
Do not leave the cleaner head in one place on delicate floors.
On waxed floors, the movement of the cleaner head may create an uneven
lustre. If this happens, wipe with a damp cloth, polish the area with wax, and
wait for it to dry.
EMPTYING YOUR CLEAR BIN
Empty as soon as the dirt reaches the MAX level – don't overfill. Using the machine
when the dirt is above the MAX line may cause the dirt to reach the filter and more
frequent maintenance will be required.
Ensure that the appliance is disconnected from the charger before emptying the
clear bin. Be careful not to pull the 'ON' trigger.
To make emptying the clear bin easier, it is advisable to remove the floor tool.
To minimise dust/allergen contact when emptying, cover the clear bin tightly in
a dust proof bag while you empty.
To release the dirt, hold the appliance by the handle, pull the red lever back and
lift upwards to release the cyclone. Continue until the bin base automatically
opens and releases the dirt.
Remove the clear bin carefully from the bag.
Seal the bag tightly and dispose.
To close, push the cyclone downwards until it is in the normal position and
manually close the base of the bin – the base will click when it is securely in place.
CLEANING THE CLEAR BIN
Ensure the appliance is disconnected from the charger before removing the
clear bin. Be careful not to pull the 'ON' trigger.
Remove the floor tool.
To remove the cyclone, hold the appliance by the handle, pull the red lever
towards you and lift upwards until the bin opens, then push in the red button located
behind the cyclone and lift the cyclone out.
To detach the clear bin from the appliance, pull back on the red catch located at the
base, slide the clear bin down and carefully remove forwards from the main body.
Clean the clear bin with a damp cloth only.
Do not use detergents, polishes or air fresheners to clean the clear bin.
Do not put the clear bin in a dishwasher.
Ensure the clear bin is completely dry before replacing.
To replace the clear bin, align the tabs on the clear bin with the grooves on the
main body and slide upwards into place until the catch clicks.
Slide the cyclone into the grooves of the main body and push downwards until
it is in its normal position and manually close the base of the bin – the base will
click when it is securely in place.
WASHABLE PARTS
Your machine has washable parts, which require regular cleaning. Follow the
instructions below.
WASHING THE FILTERS
Your appliance has two washable filters; wash the filters at least once a month
according to the following instructions to maintain performance. More frequent
washing may be required where the user: vacuums fine dust, operates mainly in
'Powerful suction' mode, or uses the machine intensively.
WASHING FILTER A
Ensure the appliance is disconnected from the charger before removing the filter. Be
careful not to pull the 'ON' trigger.
Check and wash the filter regularly according to instructions to
maintain performance.
The filter may require more frequent washing if vacuuming fine dust or if used mainly
in 'Powerful suction' mode.
To remove the filter, lift it out of the top of the appliance.
Wash the filter with cold water only.
Run water over the outside of the filter until the water runs clear.
Squeeze and twist with both hands to make sure the excess water is removed.
Leave to dry completely for a minimum of 24 hours.
Do not put any part of your appliance in a dishwasher, washing machine, tumble
dryer, oven, microwave or near a naked flame.
To refit, place the dry filter back into the top of the appliance. Make sure it is seated
properly.
WASHING FILTER B
To remove the filter, twist anti-clockwise to the open position and pull away from the
appliance.
Wash the inside of the filter under cold running water, rotating the filter to
ensure all pleats are covered.
Gently tap the filter against the side of the sink several times to remove
any debris.
Repeat this process 4-5 times until the filter is clean.
Place the filter upright, with the top of the filter facing upwards, and leave to dry
completely for a minimum of 24 hours.
To refit, return the filter to the open position and twist clockwise until it clicks
into place.
BLOCKAGES – AUTOMATIC CUT-OUT
Your machine is fitted with an automatic cut-out.
If any part becomes blocked, the machine may automatically cut out.
This will happen after the motor pulses a number of times (i.e switches on and off in
quick succession).
Leave to cool down before looking for blockages.
Ensure that the appliance is disconnected from the charger before looking for
blockages. Failure to do so could result in personal injury.
loading

Este manual también es adecuado para:

V7