Idiomas disponibles
Idiomas disponibles
H
A
ORN
LERT
The Horn Alert function can only be used with an optional relay unit.
Press the key programmed as Horn Alert to toggle the Horn Alert function ON or
OFF.
• "HA" appears on the display while Horn Alert is activated.
T
-
T
IME
OUT
IMER
The Time-out Timer is used to prevent you from using a channel for an extended
duration. If you continuously transmit for a preset time, the transceiver will stop
transmitting and an alert tone will sound. Release the PTT switch.
A
P
UXILIARY
ORT
Press the key programmed as AUX to activate the auxiliary port. The auxiliary
port is used with optional boards.
• "AU" appears on the display when the auxiliary port is active.
D
B
ISPLAY
RIGHTNESS
You can cycle the display brightness between high, low, and off by pressing the
key programmed as Display Brightness.
D
Z
C
IRECT
ONE
Press the key programmed as Direct Zone Channel to immediately select the
lowest channel of the lowest zone.
B
C
USY
HANNEL
If BCL is set up by your dealer, you will be unable to transmit if the channel is
already in use. Use a different channel or wait until the channel becomes free.
PTT ID
PTT ID is the transceiver unique ID code which is sent each time the PTT switch
is pressed and/or released.
C
OMPANDER
If programmed by your dealer for a channel, the compander will remove
excessive noise from transmitted signals, to provide higher clarity of signals.
V
A
OICE
NNOUNCEMENT
When changing the channel, an audio voice will announce the new channel.
12
BACKGROUND OPERATIONS
(TOT)
HANNEL
L
(BCL)
OCKOUT
