Background Operations; Time - Out Timer (Tot); Busy Channel Lockout (Bcl) - Kenwood TK-7302 Manual De Instrucciones

T - T
IME OUT IMER
The Time-out Timer is used to prevent you from using a channel for an extended
duration. If you continuously transmit for a preset time, the transceiver will stop
transmitting and an alert tone will sound. Release the PTT switch.
A P
UXILIARY ORT
Press the key programmed as AUX to activate the auxiliary port. The auxiliary
port is used with optional boards.
• "AU" appears on the display when the auxiliary port is active.
D B
ISPLAY RIGHTNESS
You can cycle the display brightness between high, low, and off by pressing the
key programmed as Display Brightness.
D Z C
IRECT ONE
Press the key programmed as Direct Zone Channel to immediately select the
lowest channel of the lowest zone.
B C
USY HANNEL
If BCL is set up by your dealer, you will be unable to transmit if the channel is
already in use. Use a different channel or wait until the channel becomes free.
PTT ID
PTT ID is the transceiver unique ID code which is sent each time the PTT switch
is pressed and/or released.
C
OMPANDER
If programmed by your dealer for a channel, the compander will remove
excessive noise from transmitted signals, to provide higher clarity of signals.
V A
OICE NNOUNCEMENT
When changing the channel, an audio voice will announce the new channel.

BACKGROUND OPERATIONS

(TOT)
HANNEL
L (BCL)
OCKOUT
13