Idiomas disponibles
Idiomas disponibles
ENglish
Type 27 guard
Type 28 guard
unthreaded
unthreaded
backing flange
backing flange
Type 27 depressed
Type 28 depressed
center wheel
center wheel
threaded
threaded
clamp nut
clamp nut
sanding Flap Discs
Type 27 guard
Type 27 guard
unthreaded
hubbed sanding
backing flange
flap disc
non-hubbed
sanding flap disc
threaded
clamp nut
38
ACCESSORIES CHART
grinding Wheels
Type 27 guard
Type 27 hubbed
wheel
Cutting Wheels
Type 1/41 guard*
unthreaded
backing flange
abrasive cutting
wheel
keyed flange
NoTE: Wheel size must match guard size; i.e., a new 7" wheel may not be
used with a 9" guard. The bottom surface of wheel must be inside
the bend of the guard lip.
NoTE: Wheel size must match guard size; i.e., a 7" wheel may not be used
with a 9" guard.
* NoTE: A Type 1/41 guard is available at extra cost from your local dealer
or authorized service center.
Type 28 guard
Type 27 guard
Type 28 hubbed
wheel
wire cup brush
sanding Discs
Type 1/41 guard*
rubber backing
unthreaded
backing flange
sanding disc
diamond cutting
threaded
wheel
clamp nut
keyed flange
Wire Wheels
Type 27 guard
wire wheel
Flaring Cup
stones
Type 11 Flaring
pad
cup guard
backing flange
flaring cup stone
