CFX
I
NOTE
Place the cooling box as shown (fig. 1, page 3). If you operate the box
in a different orientation it can be damaged.
2. Connect the cooling box, see chapter "Connecting the cooling box" on
page 14.
A
NOTICE! Hazard from excessively low temperature
Ensure that the only those objects are placed in the cooling box that are
intended to be cooled at the selected temperature.
3. Press the "ON/OFF" button (fig. 3 1, page 3) for between one and two
seconds.
✔ The LED "P" lights up (fig. 3 2, page 3).
✔ The display (fig. 3 5, page 3) switches on and shows the current temperature.
I
NOTE – Displayed temperature
The temperature displayed is that of the large interior compartment
(CFX50: fig. 7 1, page 5).
✔ The cooling box starts cooling the interior.
I
NOTE
When operating with the battery, the display switches off automatically
if the battery voltage is low. The LED "P" flashes orange.
Latching the cooling box lid
1. Close the lid.
2. Press the latch (fig. 2 1, page 3) down, until it latches in place audibly.
I
NOTE – Alarm "Lid open"
If the lid is left open for three minutes or more and the device is switched
on, the interior light will flash until the lid is closed.
EN
Operation
17