Installing And Connecting The Refrigerator; Mounting The Water Drain Outlet (Optional) - Dometic COOLMATIC CRX 50 Instrucciones De Montaje Y De Uso

CRX50, CRX65
7 Installing and connecting the
refrigerator
7.1 Notes on installing the refrigerator
Observe the following when installing the refrigerator:
• Install the refrigerator so that the warm air produced can easily flow away
(fig. 4, page 5).
Key for fig. 4, page 5
No. Explanation
1 Exhaust air
2 Cold intake air
3 Condenser
Observe the following installation dimensions:
Model Dimensions W x H x D (mm)
CRX50 390 x 544 x 550
CRX65 458 x 535 x 595
• Keep objects clear of openings in the housing or installation structure (such as
ventilation slots, etc.).
• Condensate is produced when the refrigerator is operating normally. You can
either wipe up the condensate on the floor of the refrigerator in regular intervals,
or drain it through a water drain outlet in the floor of the refrigerator (see chapter
"Mounting the water drain outlet (optional)" on page 17).
7.2

Mounting the water drain outlet (optional)

➤ Connect a hose with an inside diameter of 10 mm (0.4 inch) (not included) to the
water drain outlet.
➤ Lay the refrigerator on its side in order to access the bottom side.
➤ Mount the water drain outlet (fig. 5 2, page 6) aligned to the front or to the
back according to the desired direction.
➤ Remove the water drain plug (fig. 5 1, page 6) inside the refrigerator.
EN

Installing and connecting the refrigerator

Dimensions W x H x D (inch)
15.35 x 21.42 x 21.65
18.03 x 21.06 x 23.43
17