Hitachi PC-ARH1E Manual De Instalación Y Funcionamiento página 27

OPTIONAL FUNCTION
No. Item Optional function
93 Not used
g
94 Not used
A
95 Not used
L1
96 Not used
L2
Operation of the louvres in
97 energy-saving thermo OFF
L3
(Cooling / Dry mode)
Fan acceleration in energy-
98 saving thermo OFF (Cooling
L4
mode)
Louvre swing operation
99 during energy-saving forced
L5
thermo OFF
100 Not used
L6
101 Not available
L7
102 Not used
L8
103 Not used
Lg
104 Not used
LA
105 Not used
Lb
19 PMML0497 rev.1 - 12/2020
Individual
Settings
Setting
00
- -
01
00
- -
01
00
01
○ -
02
03
00
01
- -
02
03
00 Direct air blow Low (factory setting)
01 Direct air blow Medium
○
02 Direct air blow High
03 Disabled
Function disabled
00
(factory setting)
○
01 Function enabled
Function disabled
00
(factory setting)
○
01 Function enabled
00
- -
01
"- -"
- –
permanent
00
- -
01
00
○ -
01
00
- -
01
00
- -
01
Setting conditions
Use at 00 conditions
Use at 00 conditions
Use at 00 conditions
Use at 00 conditions
Power save must be ON in order
to use this function (L5 must be
set to 01).
This function is used to establish
louvre swinging operation ranging
from continuous swing to static
operation.
Low: Continuous louvre swing
Medium: Louvre swing with
intermittent stops for 20/40
seconds
High: Louvre stopped at full
opening position, according to the
setting of CF.
This function increases fan speed
by one step to prevent the loss of
comfort due to the forced thermo
OFF for energy saving during
cooling operation.
This function is used to enabled
the setting of function L3.
Use at 00 conditions
–
Use at 00 conditions
Use at 00 conditions
Use at 00 conditions
Use at 00 conditions
Description