Idiomas disponibles
Idiomas disponibles
HoW to USe tHe SPlaSH GUard
to attach sPLash Guard (Figure A):
1. Rotate Control Knob to off position "O" to turn unit off.
2. Unplug Stand Mixer.
3. After bowl and attachment are in place, lock mixer head
into the downward position.
4. From the front of the mixer, slide the Splash Guard over the
bowl until centered and chute is to the right. The inner rim
of the Splash Guard should fit against the inside edge of
the bowl.
note: Splash Guard should fit loosely on bowl for easy
assembly. Be sure to hold lid in place while pouring.
to use sPLash Guard:
1. For best results, rotate Splash Guard so the mixer head fits
into the opening of the Splash Guard. The pouring chute
will be just to the right of the attachment hub as you face
the mixer.
2. While securing Splash Guard with one hand, pour the
ingredients into the bowl through the pouring chute.
to reMove sPLash Guard (Figure B):
1. Rotate Control Knob to off position "O" to turn unit off.
2. Unplug Stand Mixer.
3. Lift the front of the Splash Guard clear of the bowl rim and
pull forward.
e n gl i s h 7
Figure A
Figure B
