Hilti TE 3-ML Manual De Instrucciones página 11

Ocultar thumbs Ver también para TE 3-ML:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
Work area
▶ If the work involves breaking right through, take the appropriate safety measures at the opposite
side. Parts breaking away could fall out and / or fall down and injure other persons.
Personal safety
▶ Wear protective gloves. The product can get hot during operation. There is a risk of injury (cutting or
burning) if the accessory tool is touched while changing it.
3
Description
3.1
Parts of the tool and operating controls
3.2
Intended use
The product described is an electrically powered rotary hammer. It is designed for drilling in concrete,
masonry, drywall / gypsum board, plastic, wood, metal and for driving and removing screws. The product
can also be used for light chiseling work on masonry and surface finishing on concrete.
Hilti products are designed for professional use and may be operated, serviced and maintained only by
trained, authorized personnel. This personnel must be informed of any particular hazards that may be
encountered. The product described and its ancillary equipment may present hazards when used incorrectly
by untrained personnel or when used not as directed.
▶ The tool may be operated only when connected to a power supply providing a voltage and frequency in
compliance with the information given on its type plate.
▶ Observe the national health and safety requirements.
▶ To reduce the risk of injury, use only genuine Hilti tools and accessories.
3.3
Examples of applications
The applications shown are possible.
3.4
Items supplied
Rotary hammer, side handle, depth gauge, operating instructions.
For safe, reliable operation, use only genuine Hilti spare parts and accessories.
accessories and consumables approved by Hilti for use with this product can be found at your Hilti
Center or at www.hilti.group.
*2121691*
1
@
;
=
%
&
(
)
+
§
/
:
2
2121691
Three-jaw chuck (TE 3-ML)
SDS quick-release chuck
Chuck locking ring
Connection for the dust collection module
Depth gauge
Forward / reverse switch
Control switch lock
Control switch
Supply cord
Function selector switch
Depth gauge release button
Side handle
Spare parts,
English
5
loading

Este manual también es adecuado para:

Te 3-cl