Idiomas disponibles
Idiomas disponibles
TRANSLATION OF THE ORIGINAL
INSTRUCTION MANUAL
BLADE SAWING MACHINE (JIGSAW)
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL
CAREFULLY AND KEEP IT FOR FUTURE REFERENCE.
DETAILED SAFETY REGULATIONS
• Whenever working tool can hit hidden electric wires or its
own power cord during operation, hold the power tool only
by insulated surfaces of the handle. Contact with power supply
line may transfer its voltage to metal parts of the power tool and
cause electric shock.
• Keep hands at safe distance from the cutting area. Do not
put them under processed piece. Contact with blade may cause
injury.
• Switch off the jigsaw after work. Remove blade from
processed piece only when it is at standstill. This way you can
avoid recoil and it is possible to safely put the power tool away.
• Use only undamaged blades in good technical condition.
Bent, blunt blades may break, additionally may affect cutting line
and cause recoil.
• Certain wood and metal types may be dangerous to
health and cause allergic reactions, respiratory tract
illness or be carcinogenic.
- Use dust masks when cutting to protect your respiratory system
against produced dust.
-Use dust extraction system when cutting wood.
-Always provide good ventilation of your workplace.
• Do not cut water system pipes with the jigsaw. Cutting a
pipe may cause material damages or electric shock.
• Carefully check the processed material before cutting to eliminate
possibility of cutting nails, bolts, or other hard objects.
• Do not cut objects thicker than allowed in technical specification
for a given material.
• Hold the jigsaw in a closed hand.
• Ensure the jigsaw does not have contact with the material before
pressing the switch.
• Do not touch moving parts with your hand.
• Do not put away the jigsaw until it stops moving. Do not switch
the jigsaw on when not holding it.
• Do not touch the blade or processed material immediately
after the work has been finished. Those elements may be hot
and may cause burns.
• When you see unusual behaviour of the tool or hear strange
noises, immediately switch off the tool and remove the plug from
mains socket.
• To ensure proper cooling keep ventilation holes in the jigsaw
body uncovered.
• Before connecting the jigsaw to mains socket make sure the
supply voltage matches the voltage on the rating plate of the tool.
• Each time before connecting the jigsaw check the power cord,
in case of damage hand over to authorized workshop for repair.
• Power cord of the jigsaw always must be on the safe side, where
there is no danger of accidental damage by operating power tool.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and
additional safety systems are used, nevertheless there is
always a small risk of injuries at work.
52G056
Explanation of used symbols
1. Read instruction manual, observe warnings and safety conditions
therein.
2. Device with class II insulation.
3. Use personal protection measures (protective goggles, earmuff
protectors, anti-dust mask)
4. Disconnect the power cord before starting maintenance or
operation.
5. Protect against rain.
6. Keep the tool away from children.
CONSTRUCTION AND USE
Jigsaw is a hand-operated power tool with insulation class II. It is
driven by a single-phase commutator motor. The tool is
designed for making straight, dividing cuts, curved cuts and
holes
in wood, wood-based materials, plastics and metals
(provided that appropriate blade is used).
Range of use covers repair and building works, and any work from
the range of individual, amateur activities (tinkering).
WARNING! Use the power tool in accordance with the
manufacturer's instructions only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the
drawing pages of this manual.
1. Work speed control wheel
2. Switch
3. Switch lock button
4. Footplate
5. Wheel for pendulum action setting
6. Guide roller
7. Edge guide locking screws
8. Blade protection
9. Blade holder
10. Dust extraction adapter
* Differences may appear between the product and drawing.
EQUIPMENT AND ACCESSORIES
1. Hexagonal key
2. Blade
3. Edge guide
4. Carrying case
PREPARATION TO WORK
FASTENING THE SAW BLADE
ATTENTION! Disconnect the power tool from the mains.
The assembly and replacement of the saw blade is carried out
without the use of tools.
• Pull back the saw blade holder lever (9) and insert the saw blade
into the saw blade holder (9) as far as it will go (the saw blade teeth
should point to the front) (fig. A).
• Important! Make sure that the saw blade is correctly seated in the
guide roller (6).
• Release the blade holder lever (6) and check that the blade is
seated properly.
• Dismantling the saw blade is in the reverse order to its assembly.
9
- 1 pce
- 1 pcs
- 1 pce
- 1 pce
