Stenner Pumps S Serie Manual De Instalación Y Mantenimiento página 55

OPERATING DISPLAY
MANUAL
NAVIGATION IN OPERATING MODE
PRIME
Runs pump at 100% speed
while button is pressed
• When no password is set in Manual Mode, the speed can be adjusted from the operating display via the UP and DOWN buttons.
• If a password is set, the pump controls will lock out after 60 seconds if there is no keypad activity.
• To unlock the pump, press ENTER for 2 seconds. The pump will display a prompt to enter a password.
Run Pump?
Yes
yes/no
Manual %
OFF
If unlocked or password not set.
S Series FW 4.01.02 US and Canada 800.683.2378, International 904.641.1666 www.stenner.com
continued
ON/OFF
Turns pump control ON or OFF
WARNING: DOES NOT remove power.
Manual
select
Manual
100
Pump runs at 100% speed while
the PRIME button is pressed (if
unlocked or password not set).
Prime symbol and 100 will flash
while PRIME is pressed.
BACK
Cycles the display through
the units of output
%
50
Hold for 2 seconds
%
Prime
Metric is displayed if
selected in Configuration
55
ENTER
Press and hold for 2 seconds
to go to the Main Menu
Enter password if display is
locked. To Main Menu if unlocked.
Manual RPM
22
Manual GPD
20.0
Manual GPH
0.83
Manual oz/min
1.77