Stenner Pumps S Serie Manual De Instalación Y Mantenimiento página 25

CONFIGURATION MENU
OUTPUT RELAYS
page 3 of 5
• Program the individual output relays (1, 2, and/or 3) as desired. Example illustrates selecting Relay #1
• Enable or disable the relays as desired.
NAVIGATION
Moves up in a menu, toggles
between options, or increase a value
Holding the or button causes the numbers to change rapidly.
Configuration
- Leak Detect
- Flow Verification
- Outputs
S Series FW 4.01.02 US and Canada 800.683.2378, International 904.641.1666 www.stenner.com
continued
Moves down in a menu, toggles
between options, or decreases a value
Outputs
- Program Relays
- Enable/Disable
- TO CONFIGURE MENU
Outputs
- Program Relays
- Enable/Disable
- TO CONFIGURE MENU
Outputs
- Program Relays
- Enable/Disable
- TO CONFIGURE MENU
To Configuration menu
When relays have been
programmed and enabled
or disabled as desired or
to exit this menu, choose
"To Configuration Menu"
and press ENTER.
25
Moves one step back in
a menu, when permitted
Continued on next page
Select Relay Enable
Relay #1
adjust
set
Relay #X
Enable
. N/DIS set
Relay #X
Disable
. N/DIS set
Sets a value in a menu
Enable Relay.
To Outputs menu
Use this option to Enable
or Disable each relay.
Disable Relay.
To Outputs menu