Stenner Pumps S Serie Manual De Instalación Y Mantenimiento página 27

CONFIGURATION MENU
OUTPUT RELAYS
page 5 of 5
Continued from previous page
Relay #1
Mode Change On
on/off
S Series FW 4.01.02 US and Canada 800.683.2378, International 904.641.1666 www.stenner.com
continued
ONLY ONE MODE
CAN BE SELECTED
set ok
Relay #1 Relay #X Mode Change
Leak Detect Manual
on/off on/off
Off
Relay #X Relay #1 Mode Change
4-20mA Leak Detect
on/off on/off
Off
Relay #X Relay #1 Mode Change
Leak Detect
0-10 VDC
on/off on/off
Off
Relay #X Relay #1 Mode Change
Leak Detect 7 Day Timer
on/off on/off
Off
Relay #X Relay #1 Mode Change
Leak Detect Pulse
on/off on/off
Off
Relay #X Relay #1 Mode Change
Leak Detect
Cycle Timer
on/off on/off
Off
Relay #1 Relay #X Mode Change
Hall Effect Leak Detect
on/off on/off
Off
Relay #X Relay #1 Mode Change
Leak Detect PPM Feed
on/off on/off
Off
To Outputs menu
27
If Mode Change is enabled, then select "ON" to
enable only ONE mode operation.
The mode must be the mode the pump will be
programmed to run in.
As soon as any mode is selected, the display will go
to the Outputs menu so the relays can be enabled.
On
Off Off
To Outputs menu
set set
On
Off Off
To Outputs menu
set set
On
Off
Off
To Outputs menu
set set
On
Off Off
To Outputs menu
set set
On
Off Off
To Outputs menu
set set
On
Off
Off
To Outputs menu
set set
On
Off Off
To Outputs menu
set set
On
Off Off
To Outputs menu
set set