Stenner Pumps S Serie Manual De Instalación Y Mantenimiento página 11

GENERAL INFORMATION
The S Series is an advanced peristaltic pump design with multiple programming features and
performance indicators. The S Series offers practical and flexible functions for municipal, wastewater
and industrial applications.
PUMP FEATURES
• Brushless DC Motor with ball bearing support
• Switch mode power supply
• Microcontroller
• Blue OLED Display
• Six button keypad on control panel
• Modbus RTU over RS-485 capability
NAVIGATION BUTTONS
Button General Function
• Moves up in a menu
UP • Toggles between menu options
• Increases a value
• Moves down in a menu
DOWN • Toggles between options
• Decreases a value
PRIME N/A
ON/OFF N/A
BACK Moves one step back in a menu when permitted Cycles the display to show different units of output
ENTER Sets a value
SETUP
The very first time the pump is turned on, the display will show the Firmware Version followed by the Main Menu screen.
S SERIES
The display will indicate
the pump's software version.
If the pump was previously programmed, the display will return to the mode it was in when it was turned off or if power
was lost.
S Series FW 4.01.02 US and Canada 800.683.2378, International 904.641.1666 www.stenner.com
OUTPUT
• Up to 315.0 gpd @ 25 psi max.
• Up to 125.0 gpd @ 100 psi max.
CONTROL PANEL
Main Menu
- Configuration
- Control Mode
- Run Pump
11
M AI N M E NU
- C ON F I G UR A T IO N
- C ON T R OL M O DE
- R UN P U MP
Operating Mode Function
Increases the speed percent in the Manual mode
Decreases the speed percent in the Manual mode
Runs pump at 100% speed while button is pressed
Turns pump control ON or OFF
WARNING: DOES NOT REMOVE POWER
Press and hold for 2 seconds to go to the
Main Menu