Hilti TE 60-AVR Manual De Instrucciones página 14

3.5 Undercut anchors
The product is suitable for setting undercut anchors. Use only suitable
setting tools.
Detailed information on this topic can be obtained at your local Hilti Center.
3.6 ATC
The product is equipped with the ATC (Active Torque Control) quick-acting
electronic cut-out.
If the accessory tool sticks or stalls, the product will suddenly pivot about
its own axis in the opposite direction. ATC detects this sudden pivoting
movement of the product and switches the product off immediately.
For ATC to function correctly, the product must be free to pivot.
After an ATC cut-out, switch the product off and then on again.
3.7 Active Vibration Reduction
The tool is equipped with an Active Vibration Reduction (AVR) system which
reduces vibration noticeably.
3.8 Quick-release chuck (accessory)
The quick-release chuck makes changing accessory tools a quick operation
with no additional tools needed. It is suitable for accessory tools with
cylindrical or hexagonal shank used in the "Without hammering action
mode.
3.9 Service indicator
The product is equipped with a service indicator LED.
3.9.1 Service indicator status
Status
The service indicator lights.
The service indicator blinks.
3.10 Items supplied
Combihammer, side handle, operating instructions.
4 Technical data
When powered by a generator or transformer, the generator or transformer's
power output must be at least twice the rated input power shown on the rating
8 English
Meaning
End of service interval – servicing is
due.
Have the combihammer repaired by
Hilti Service.
2134961
*2134961*
"