Hilti TE 60-AVR Manual De Instrucciones página 13

▶ Take frequent breaks and do physical exercises to improve the blood
circulation in your fingers. High vibration during long periods of work can
lead to disorders of the blood vessels and nervous system in the fingers,
hands and wrists.
Electrical safety
▶ Before beginning work, check the working area for concealed electric
cables or gas and water pipes. External metal parts of the product could
give you an electric shock or cause an explosion if you accidentally
damage an electric cable or a gas or water pipe.
Power tool use and care
▶ Switch the product off immediately if the accessory tool jams. The
product might twist off-line.
▶ Wait until the product has come to a complete stop before you lay it
down.
3 Description
3.1 Overview of the product
Chuck
@
Depth gauge
;
Function selector switch
=
Control switch
%
Supply cord
&
Side handle
(
3.2 Version with detachable supply cord
Lockbutton
@
Connector on electric tool
;
3.3 Intended use
The product described is an electrically powered combihammer with pneu-
matic hammering mechanism. It is designed for drilling in concrete, masonry,
wood and metal. The product can also be used for light- to medium-duty
chiseling on masonry and surface finishing work on concrete.
▶ The tool may be operated only when connected to a power source
providing a voltage and frequency in compliance with the information
given on the type identification plate.
3.4 Possible misuse
• This product is not suitable for working on hazardous materials.
• This product is not suitable for working in a damp environment.
*2134961*
1
)
+
§
/
=
2134961
Lockbutton for continuous
operation
Service indicator
Reduced-power indicator
Power reduction button (50%
power)
2
Supply cord with keyed, re-
leasable plug connector
English 7