Mitsubishi Electric Mr.SLIM MSH24WN Manual De Instrucciones página 8

Idiomas disponibles

Idiomas disponibles

MANUAL OPERATION (COOL, DRY, HEAT)
TOO
ON/OFF
WARM
FAN
I FEEL COOL
VANE
HEAT
DRY
MODE
WIDE VANE
LONG
RESET CLOCK
8
Get user manuals:
See SafeManuals.com
To select the COOL, DRY or HEAT mode
ON/OFF
1
Press the
button.
2
Select the operation mode by pressing the
MODE
button.
Each time this button is pressed, the operation mode
is changed in sequence:
→ → → → →
(DRY) → → → → →
(HEAT)
To stop operation:
˚F
I
ON/OFF
Press the
button.
CLOCK
AMPM
After the operation mode is set once, the operation
AMPM
starts in the same mode as the one set previously
from the next time by simply pressing the
TOO
COOL
I
When the set temperature is to be changed:
TOO
WARM
I Press the
button to lower the temperature. One
press lowers the temperature by about 2
TOO
COOL
I Press the
button to raise the temperature. One
STOP
press raises the temperature by about 2
START
In HEAT operation
I If the air conditioner absorbs too much heat from
HR.
the air, it may be overloaded. Following a judgement
made by the microprocessor, the fan in the outdoor
unit is automatically stopped to protect the air con-
MIN.
ditioner.
When the outdoor unit's fan is stopped, frost may
form on the outdoor unit, but this is not a problem.
In DRY operation
I The temperature control (temperature setting) can-
not be done.
I The room temperature is slightly lowered in this
operation mode.
I
The details of the display on the indoor unit
are explained on page 7.
NOTE
When the ambient temperature is too high, the room tem-
perature may not reach the set temperature since the unit
operates to cool the room under a high load.
CONVENIENT INFORMATION
COOL
For effective cooling
1 Close the windows and pull
down blinds. Sunshine is re-
duced and cooling efficiency
increases.
(I FEEL...) → → → → →
(COOL)
ON/OFF
button.
HEAT
Comfortable warmth depends on the temperature difference between the indoor and
the outdoor.
It is recommended that the set temperature in the heating operation does not differ from the external tem-
perature too much. Though there is a regional difference, as a reference, a set temperature between about
71 °F and 75 °F would be suitable.
°
F.
°
F.
DRY
The humidity at which people feel comfortable
When air contains too much moisture, people feel uncomfortable. Humidity is related to temperature and
wind. The humidity at which people feel comfortable is 60 % - 75 % RH in summer, 55 % - 70 % RH in
winter.
Description of "AUTO RESTART FUNCTION"
Refer to page 7.
2 Paste a heat shield film (gen-
3 Block the outdoor unit from di-
erally available) on the window.
rect sunlight. This saves en-
Heat entering the room is re-
ergy.
duced.
loading