Idiomas disponibles
Idiomas disponibles
LONG OPERATION
Use this operation when you want the air flow to
reach a long distance.
TOO
ON/OFF
WARM
FAN
I FEEL COOL
VANE
HEAT
DRY
MODE
WIDE VANE
LONG
RESET CLOCK
10
Get user manuals:
See SafeManuals.com
Perform the following operations while the
unit is operating.
I
LONG
Press the
button.
The fan speed increases.
When the fan speed is set to
is higher than a fan speed determined by the room
temperature and the set temperature.
In addition, the HORIZONTAL VANE moves to the po-
sition for LONG mode.
Mechanism of the LONG operation
˚F
˚C
In the following example, the VERTICAL VANE is set to
CLOCK
AMPM
(front).
AMPM
COOL/DRY
TOO
COOL
STOP
Fan speed: Higher
Solid arrow: When the LONG mode is used
START
Dotted arrow: When the LONG mode is not used
To release the LONG mode:
HR.
MIN.
I
LONG
Press the
button again.
I LONG mode is also released by pressing the
I Even when the LONG mode is being used, the air may not
reach a long distance due to the installation location of the
air conditioner.
FAN
In this case, press the
(High), and then press the
I
MODE
FAN
WIDE VANE
,
, and
buttons, temperature buttons and the ON/
OFF timer (explained on the right) are available.
TIMER OPERATION (ON/OFF TIMER)
TIMER
It is convenient to set the timer when you go to
bed, when you get home, when you get up, etc.
(AUTO), the fan speed
HEAT
ON/OFF
I FEEL COOL
HEAT
DRY
MODE
WIDE VANE
VANE
button.
button to set the fan speed to
LONG
button.
How to set the ON timer
START
1
Press the
Each time the button is pressed, the ON timer mode
alternates between ON and OFF.
2
Set the time of the timer using the
MIN.
and
buttons.
HR.
Each time the
˚C
creases by 1 hour; each time the
pressed, the set time increases by 10 minutes.
CLOCK
AMPM
To release the ON timer:
I
AMPM
START
Press the
TOO
TOO
WARM
COOL
How to set the OFF timer
STOP
1
Press the
Each time the button is pressed, the OFF timer mode
alternates between ON and OFF.
FAN
STOP
2
Set the time of the timer using the
MIN.
VANE
START
and
buttons.
HR.
Each time the
HR.
creases by 1 hour; each time the
pressed, the set time increases by 10 minutes.
LONG
MIN.
To release the OFF timer:
I
STOP
Press the
RESET CLOCK
Programming timer operation
The ON timer and the OFF timer can be used in combination.
The timer of the set time that is reached first will operate first.
(" " mark indicates the order of timer operations.)
I If the current time has not been set, the timer operation can-
not be used.
NOTE
If the main power is turned off or a power failure occurs
while AUTO START/STOP timer is active, the timer setting
is cancelled. As this model is equipped with an auto restart
function, the air conditioner should start operating at the
same time that power is restored.
button during operation.
HR.
button is pressed, the set time in-
MIN.
button is
button.
button during operation.
HR.
button is pressed, the set time in-
MIN.
button is
button.
