Idiomas disponibles
Idiomas disponibles
Close the fuel valve (f).
•
•
Replace the engine oil with fresh oil (if it has not been changed
recently or shows signs of wear).
•
On a cold engine, remove the ignition wire pipe from the spark plug
and unscrew the spark plug and pour 5-10 ml of fresh engine oil into
the cylinder through its opening. Screw the spark plug back in.
Pull the starter tug handle until you feel resistance so that the oil is
•
distributed in the cylinder preserving the engine from the inside.
Next, make 8-10 slow movements with the pull as if you wanted to
start the engine.
Clean the device, especially the engine, from dirt and other
•
contaminants such as dust.
Inspect the machine for worn or damaged parts - replace them if
•
necessary.
•
If necessary, inflate the air in the wheels to the maximum allowable
pressure (see the marking on the tire).
Store the machine in a dry, roofed building with good ventilation and
•
away from heat and sunlight.
